The Effects Of Boriding at 800°C at Different Times on Ti6Al4V

Fazıl Hüsem

Makale detayları

The Effects Of Boriding at 800°C at Different Times on Ti6Al4V

Yazarlar:

Fazıl Hüsem

Yayıncı:

Kirikkale University

Ana Başlıklar:

Materials Engineering (Other)

Dergi:

International Journal of Engineering Research and Development Vol.15 Issue 2, pp.881-890

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001284786

pISSN:

1308-5506

Anahtar kelimeler:

Özet:

 This study investigates boronization of 800 degree Ti6Al4V alloy at different times. Ti6Al4V alloy has a wide range of industrial applications due to its light weight, high strength and corrosion resistance. Boronizing is a surface modification method used to improve the surface properties of the alloy. The aim of the study is to evaluate the effect of boriding process carried out at 800 degrees on the structural and mechanical properties of Ti6Al4V alloy. In this study, various analysis methods were used to determine the effect of boriding process. Microstructural analysis of the examined samples was carried out by scanning electron microscopy SEM and X-ray diffraction XRD. In addition, the mechanical properties of boronized samples were evaluated by hardness tests and abrasion resistance tests. The results show that 800 degree Ti6Al4V boronizing significantly improves the surface properties of the alloy. As a result of boriding process, surface hardness increases and wear resistance improves. Microstructural analysis revealed that boride phases such as TiB2 were formed with the increase of boriding temperature. These phases are important factors that increase the hardness and wear resistance of the surface of the alloy. In conclusion, this study presents the important results of the 800 degree boronizing process of Ti6Al4V alloy. This information can be used to optimize the surface modification to increase the durability of the Ti6Al4V alloy in industrial applications.

 This study investigates boronization of 800 degree Ti6Al4V alloy at different times. Ti6Al4V alloy has a wide range of industrial applications due to its light weight, high strength and corrosion resistance. Boronizing is a surface modification method used to improve the surface properties of the alloy. The aim of the study is to evaluate the effect of boriding process carried out at 800 degrees on the structural and mechanical properties of Ti6Al4V alloy. In this study, various analysis methods were used to determine the effect of boriding process. Microstructural analysis of the examined samples was carried out by scanning electron microscopy SEM and X-ray diffraction XRD. In addition, the mechanical properties of boronized samples were evaluated by hardness tests and abrasion resistance tests. The results show that 800 degree Ti6Al4V boronizing significantly improves the surface properties of the alloy. As a result of boriding process, surface hardness increases and wear resistance improves. Microstructural analysis revealed that boride phases such as TiB2 were formed with the increase of boriding temperature. These phases are important factors that increase the hardness and wear resistance of the surface of the alloy. In conclusion, this study presents the important results of the 800 degree boronizing process of Ti6Al4V alloy. This information can be used to optimize the surface modification to increase the durability of the Ti6Al4V alloy in industrial applications.

 This study investigates boronization of 800 degree Ti6Al4V alloy at different times. Ti6Al4V alloy has a wide range of industrial applications due to its light weight, high strength and corrosion resistance. Boronizing is a surface modification method used to improve the surface properties of the alloy. The aim of the study is to evaluate the effect of boriding process carried out at 800 degrees on the structural and mechanical properties of Ti6Al4V alloy. In this study, various analysis methods were used to determine the effect of boriding process. Microstructural analysis of the examined samples was carried out by scanning electron microscopy SEM and X-ray diffraction XRD. In addition, the mechanical properties of boronized samples were evaluated by hardness tests and abrasion resistance tests. The results show that 800 degree Ti6Al4V boronizing significantly improves the surface properties of the alloy. As a result of boriding process, surface hardness increases and wear resistance improves. Microstructural analysis revealed that boride phases such as TiB2 were formed with the increase of boriding temperature. These phases are important factors that increase the hardness and wear resistance of the surface of the alloy. In conclusion, this study presents the important results of the 800 degree boronizing process of Ti6Al4V alloy. This information can be used to optimize the surface modification to increase the durability of the Ti6Al4V alloy in industrial applications.

 Bu çalışma, 800 derece Ti6Al4V alaşımının farklı sürelerde borlanması araştırmaktadır. Ti6Al4V alaşımı, hafiflik, yüksek mukavemet ve korozyon direnci gibi özellikleri nedeniyle geniş bir endüstriyel uygulama alanına sahiptir. Borlama, alaşımın yüzey özelliklerini iyileştirmek için kullanılan bir yüzey modifikasyon yöntemidir. Çalışmanın amacı, 800 derece sıcaklıkta gerçekleştirilen borlama sürecinin Ti6Al4V alaşımının yapısal ve mekanik özelliklerine etkisini değerlendirmektir. Bu çalışmada, borlama işleminin etkisini belirlemek için çeşitli analiz yöntemleri kullanılmıştır. İncelenen örneklerin mikroyapısal analizi, taramalı elektron mikroskobu SEM ve X-ışını difraksiyonu XRD ile gerçekleştirilmiştir. Ayrıca, borlanmış örneklerin mekanik özellikleri, sertlik testleri ve aşınma direnci testleri ile değerlendirilmiştir. Elde edilen sonuçlar, 800 derece Ti6Al4V borlanmasının alaşımın yüzey özelliklerini önemli ölçüde iyileştirdiğini göstermektedir. Borlama işlemi sonucunda yüzey sertliği artar ve aşınma direnci gelişir. Mikroyapısal analiz, borlama sıcaklığının artmasıyla birlikte TiB2 gibi borür fazlarının oluştuğunu ortaya koymuştur. Bu fazlar, alaşımın yüzeyinin sertliğini ve aşınma direncini artıran önemli faktörlerdir. Sonuç olarak, bu çalışma Ti6Al4V alaşımının 800 derece borlanması sürecinin önemli sonuçlarını sunmaktadır. Bu bilgiler, endüstriyel uygulamalarda Ti6Al4V alaşımının dayanıklılığını artırmak için yüzey modifikasyonunun optimize edilmesinde kullanılabilir.

Makale detayları

The Effects Of Boriding at 800°C at Different Times on Ti6Al4V

Yazarlar:

Fazıl Hüsem

Yayıncı:

Kirikkale University

Ana Başlıklar:

Materials Engineering (Other)

Dergi:

International Journal of Engineering Research and Development Vol.15 Issue 2, pp.881-890

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001284786

pISSN:

1308-5506

Boriding

Wear

XRD

Borlama

Aşınma

XRD

Sayı

Makale detayları

The Effects Of Boriding at 800°C at Different Times on Ti6Al4V

Yazarlar: Fazıl Hüsem

Yayıncı: Kirikkale University

Ana Başlıklar: Materials Engineering (Other)

Dergi: International Journal of Engineering Research and Development Vol.15 Issue 2, pp.881-890

Belge Tipi: Makale

Yayın Tarihi: 7/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001284786

pISSN: 1308-5506

Boriding

Wear

XRD

Borlama

Aşınma

XRD

Sayı

Yazarlar:

Fazıl Hüsem

Yayıncı:

Kirikkale University

Ana Başlıklar:

Materials Engineering (Other)

Dergi:

International Journal of Engineering Research and Development Vol.15 Issue 2, pp.881-890

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001284786

pISSN:

1308-5506