Investigation of bending behavior of foam core sandwich plates with different face and core materials at different layer thicknesses

Derya Çıraklı; Uğur Albayrak; Mustafa Halûk Saraçoğlu

Makale detayları

Investigation of bending behavior of foam core sandwich plates with different face and core materials at different layer thicknesses

Yazarlar:

Derya Çıraklı | Uğur Albayrak | Mustafa Halûk Saraçoğlu

Yayıncı:

Kütahya Dumlupinar University

Ana Başlıklar:

Numerical Modelization in Civil Engineering | Structural Engineering

Dergi:

Journal of Scientific Reports-A Issue 055, pp.80-92

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001299698

pISSN:

2687-6167

Anahtar kelimeler:

Özet:

 Sandwich plates consist of a total of three layers with a thick core layer between two thin face layers. While the face layers provide resistance against bending, the core layer provides resistance against shear. General purpose finite element software programs are one of the most convenient and widely used analysis procedures for investigating the behavior of structures. Many design parameters can be easily examined by these analysis programs. In this study, the bending behavior of simply supported sandwich square plates on four sides with a ratio of core layer thickness to face layer thickness between 7 and 9 was investigated by using the general purpose finite element software program. The effect of the thickness change was investigated by changing the face and core layer thicknesses of the sandwich plates with a fixed total thickness. At the same time, the face and core materials were changed and the most suitable design in bending behavior was revealed. For this purpose, 110 analyzes were performed with 2 different face materials, 5 different core materials, 11 different thickness ratios, and the results were presented with graphics.

 Sandwich plates consist of a total of three layers with a thick core layer between two thin face layers. While the face layers provide resistance against bending, the core layer provides resistance against shear. General purpose finite element software programs are one of the most convenient and widely used analysis procedures for investigating the behavior of structures. Many design parameters can be easily examined by these analysis programs. In this study, the bending behavior of simply supported sandwich square plates on four sides with a ratio of core layer thickness to face layer thickness between 7 and 9 was investigated by using the general purpose finite element software program. The effect of the thickness change was investigated by changing the face and core layer thicknesses of the sandwich plates with a fixed total thickness. At the same time, the face and core materials were changed and the most suitable design in bending behavior was revealed. For this purpose, 110 analyzes were performed with 2 different face materials, 5 different core materials, 11 different thickness ratios, and the results were presented with graphics.

 Sandwich plates consist of a total of three layers with a thick core layer between two thin face layers. While the face layers provide resistance against bending, the core layer provides resistance against shear. General purpose finite element software programs are one of the most convenient and widely used analysis procedures for investigating the behavior of structures. Many design parameters can be easily examined by these analysis programs. In this study, the bending behavior of simply supported sandwich square plates on four sides with a ratio of core layer thickness to face layer thickness between 7 and 9 was investigated by using the general purpose finite element software program. The effect of the thickness change was investigated by changing the face and core layer thicknesses of the sandwich plates with a fixed total thickness. At the same time, the face and core materials were changed and the most suitable design in bending behavior was revealed. For this purpose, 110 analyzes were performed with 2 different face materials, 5 different core materials, 11 different thickness ratios, and the results were presented with graphics.

 Sandwich plates consist of a total of three layers with a thick core layer between two thin face layers. While the face layers provide resistance against bending, the core layer provides resistance against shear. General purpose finite element software programs are one of the most convenient and widely used analysis procedures for investigating the behavior of structures. Many design parameters can be easily examined by these analysis programs. In this study, the bending behavior of simply supported sandwich square plates on four sides with a ratio of core layer thickness to face layer thickness between 7 and 9 was investigated by using the general purpose finite element software program. The effect of the thickness change was investigated by changing the face and core layer thicknesses of the sandwich plates with a fixed total thickness. At the same time, the face and core materials were changed and the most suitable design in bending behavior was revealed. For this purpose, 110 analyzes were performed with 2 different face materials, 5 different core materials, 11 different thickness ratios, and the results were presented with graphics.

Makale detayları

Investigation of bending behavior of foam core sandwich plates with different face and core materials at different layer thicknesses

Yazarlar:

Derya Çıraklı | Uğur Albayrak | Mustafa Halûk Saraçoğlu

Yayıncı:

Kütahya Dumlupinar University

Ana Başlıklar:

Numerical Modelization in Civil Engineering | Structural Engineering

Dergi:

Journal of Scientific Reports-A Issue 055, pp.80-92

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001299698

pISSN:

2687-6167

Finite element method

Foam-core sandwich plate

Mid-point deflection

Thin plate

Static analysis

Sayı

Makale detayları

Investigation of bending behavior of foam core sandwich plates with different face and core materials at different layer thicknesses

Yazarlar: Derya Çıraklı | Uğur Albayrak | Mustafa Halûk Saraçoğlu

Yayıncı: Kütahya Dumlupinar University

Ana Başlıklar: Numerical Modelization in Civil Engineering | Structural Engineering

Dergi: Journal of Scientific Reports-A Issue 055, pp.80-92

Belge Tipi: Makale

Yayın Tarihi: 12/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001299698

pISSN: 2687-6167

Finite element method

Foam-core sandwich plate

Mid-point deflection

Thin plate

Static analysis

Sayı

Yazarlar:

Derya Çıraklı | Uğur Albayrak | Mustafa Halûk Saraçoğlu

Yayıncı:

Kütahya Dumlupinar University

Ana Başlıklar:

Numerical Modelization in Civil Engineering | Structural Engineering

Dergi:

Journal of Scientific Reports-A Issue 055, pp.80-92

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001299698

pISSN:

2687-6167