Investigation of the Role of Abrasive Particle Velocity on the inner Pipe Surface Erosive Wear Resistance of Composite Pipes Reinforced with Basalt Fibre and Graphene Nanoplatelets

Seyit Mehmet Demet

Makale detayları

Investigation of the Role of Abrasive Particle Velocity on the inner Pipe Surface Erosive Wear Resistance of Composite Pipes Reinforced with Basalt Fibre and Graphene Nanoplatelets

Yazarlar:

Seyit Mehmet Demet

Yayıncı:

Cukurova University

Ana Başlıklar:

Makine Mühendisliği (Diğer)

Dergi:

Çukurova Üniversitesi Mühendislik Fakültesi Dergisi Vol.38 Issue 4, pp.907-915

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307424

pISSN:

2757-9255

Anahtar kelimeler:

Özet:

 In this study, two different composite pipes manufactured with filament winding technique in 554 winding configurations were investigated by considering the erosive behaviour of the inner surface of the pipe which may be subjected to erosive wear in substructure and material transfer applications where may be worn because of material flow. The solid particle erosion behaviour of basalt fibre reinforced composite pipe BETKB and basalt fibre reinforced composite pipes reinforced with 0.25 wt  graphene nanoplatelets GNPBETKB were compared by considering the results obtained from the experiments. When evaluating the erosion rate resulting from impacting alumina abrasive particles on the inner surface of a pipe at various impact velocities namely 23 ms, 28 ms, 34 ms, and 53 ms and impingement angles 30, 45, 60, it was observed that graphene nanoplatelets reinforcement increased the resistance to erosive wear in basalt fibre-reinforced pipes. As indicated by the graphs, which also analyse the proportional change in erosion rate, the graphene nanoplatelets reinforcement achieved an erosion rate reduction of almost 50 at the impact velocity of 28 ms. It was observed that the wear model of both pipes showed a behaviour suitable for the semi-ductile wear model.

 In this study, two different composite pipes manufactured with filament winding technique in 554 winding configurations were investigated by considering the erosive behaviour of the inner surface of the pipe which may be subjected to erosive wear in substructure and material transfer applications where may be worn because of material flow. The solid particle erosion behaviour of basalt fibre reinforced composite pipe BETKB and basalt fibre reinforced composite pipes reinforced with 0.25 wt  graphene nanoplatelets GNPBETKB were compared by considering the results obtained from the experiments. When evaluating the erosion rate resulting from impacting alumina abrasive particles on the inner surface of a pipe at various impact velocities namely 23 ms, 28 ms, 34 ms, and 53 ms and impingement angles 30, 45, 60, it was observed that graphene nanoplatelets reinforcement increased the resistance to erosive wear in basalt fibre-reinforced pipes. As indicated by the graphs, which also analyse the proportional change in erosion rate, the graphene nanoplatelets reinforcement achieved an erosion rate reduction of almost 50 at the impact velocity of 28 ms. It was observed that the wear model of both pipes showed a behaviour suitable for the semi-ductile wear model.

 In this study, two different composite pipes manufactured with filament winding technique in 554 winding configurations were investigated by considering the erosive behaviour of the inner surface of the pipe which may be subjected to erosive wear in substructure and material transfer applications where may be worn because of material flow. The solid particle erosion behaviour of basalt fibre reinforced composite pipe BETKB and basalt fibre reinforced composite pipes reinforced with 0.25 wt  graphene nanoplatelets GNPBETKB were compared by considering the results obtained from the experiments. When evaluating the erosion rate resulting from impacting alumina abrasive particles on the inner surface of a pipe at various impact velocities namely 23 ms, 28 ms, 34 ms, and 53 ms and impingement angles 30, 45, 60, it was observed that graphene nanoplatelets reinforcement increased the resistance to erosive wear in basalt fibre-reinforced pipes. As indicated by the graphs, which also analyse the proportional change in erosion rate, the graphene nanoplatelets reinforcement achieved an erosion rate reduction of almost 50 at the impact velocity of 28 ms. It was observed that the wear model of both pipes showed a behaviour suitable for the semi-ductile wear model.

 Bu çalışmada 554 sarım konfigürasyonunda filament sarım tekniği ile imal edilen iki farklı kompozit borunun boru içi malzeme akşının olduğu alt yapı ve malzeme aktarım uygulamalarında erozif aşınmaya maruz kalabilecek boru iç yüzeyinin erozyon davranışı dikkate alınarak araştırılmıştır. Bazalt elyaf takviyeli kompozit boru BETKB ile ağırlıkça 0,25 grafen nanoplakalar ile güçlendirilmiş bazalt elyaf takviyeli kompozit boruların GNPBETKB katı partikül erozyon davranışları yapılan deneylerden elde edilen sonuçlar dikkate alınarak karşılaştırılmıştır. Dört farklı çarpma hızında 23 ms, 28 ms, 34 ms, 53 ms ve üç farklı çarpma açısında 30, 45, 60 alümina aşındırıcı partiküller boru iç yüzeyine çarptırılarak elde edilen erozyon oranı değerlendirildiğinde grafen nanoplaka takviyesinin bazalt elyaf takviyeli boruda erozyon aşınmasına karşı direnci artırdığı görülmüştür. Erozyon oranının oransal değişiminin de incelendiği grafiklerde de sunulduğu üzere 28 ms çarpma hızında 50ye yakın bir erozyon oranı azalımı grafen nanoplaka takviyesi sayesinde elde edilmiştir. Her iki borunun aşınma modelinin yarı sünek aşınma modeline uygun bir davranış sergilediği belirlenmiştir.

Makale detayları

Investigation of the Role of Abrasive Particle Velocity on the inner Pipe Surface Erosive Wear Resistance of Composite Pipes Reinforced with Basalt Fibre and Graphene Nanoplatelets

Yazarlar:

Seyit Mehmet Demet

Yayıncı:

Cukurova University

Ana Başlıklar:

Makine Mühendisliği (Diğer)

Dergi:

Çukurova Üniversitesi Mühendislik Fakültesi Dergisi Vol.38 Issue 4, pp.907-915

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307424

pISSN:

2757-9255

Filament winding technique

Erosive wear

Graphene nanoplatelets reinforced composite pipeFilament sarım tekniği

Erozyon aşınması

Grafen nanoplaka takviyeli kompozit boru

Sayı

Makale detayları

Investigation of the Role of Abrasive Particle Velocity on the inner Pipe Surface Erosive Wear Resistance of Composite Pipes Reinforced with Basalt Fibre and Graphene Nanoplatelets

Yazarlar: Seyit Mehmet Demet

Yayıncı: Cukurova University

Ana Başlıklar: Makine Mühendisliği (Diğer)

Dergi: Çukurova Üniversitesi Mühendislik Fakültesi Dergisi Vol.38 Issue 4, pp.907-915

Belge Tipi: Makale

Yayın Tarihi: 12/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001307424

pISSN: 2757-9255

Filament winding technique

Erosive wear

Graphene nanoplatelets reinforced composite pipeFilament sarım tekniği

Erozyon aşınması

Grafen nanoplaka takviyeli kompozit boru

Sayı

Yazarlar:

Seyit Mehmet Demet

Yayıncı:

Cukurova University

Ana Başlıklar:

Makine Mühendisliği (Diğer)

Dergi:

Çukurova Üniversitesi Mühendislik Fakültesi Dergisi Vol.38 Issue 4, pp.907-915

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307424

pISSN:

2757-9255