A Novel PI-PD Controller Tuning Method based on Neutrosophic Similarity Measure for Unstable and Integrating Processes with Time Delay

Tufan Doğruer

Makale detayları

A Novel PI-PD Controller Tuning Method based on Neutrosophic Similarity Measure for Unstable and Integrating Processes with Time Delay

Yazarlar:

Tufan Doğruer

Yayıncı:

Dicle University

Dergi:

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi Vol.14 Issue 2, pp.273-281

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001291727

pISSN:

1309-8640

Anahtar kelimeler:

Özet:

 Integrating systems and unstable systems are two types of systems that are widely used in various industries, including control engineering and electrical engineering. However, controlling these systems can be a daunting task due to their inherent complexity. To address this challenge, the PI-PD controller structure has been widely adopted in the industry, as it has proven to be very successful in controlling integrating and unstable systems. In this paper, a new design method is proposed to determine the optimal controller parameters in the control of integrating and unstable systems with time delay. The design method utilizes a Genetic Algorithm-based optimization technique, which incorporates a new objective function that is based on the neutrosophic similarity measure. Two different types of plants have been chosen as examples in this study. The first plant is a time-delayed integrating system. The second plant is an unstable system, which means that the output signal is very sensitive to any changes or disturbances in the input signal. This study examines the parameter uncertainties of systems by comparing them with some design methods from the literature. The results are presented comparatively in figures and tables to show the superiority of the proposed method.

 Integrating systems and unstable systems are two types of systems that are widely used in various industries, including control engineering and electrical engineering. However, controlling these systems can be a daunting task due to their inherent complexity. To address this challenge, the PI-PD controller structure has been widely adopted in the industry, as it has proven to be very successful in controlling integrating and unstable systems. In this paper, a new design method is proposed to determine the optimal controller parameters in the control of integrating and unstable systems with time delay. The design method utilizes a Genetic Algorithm-based optimization technique, which incorporates a new objective function that is based on the neutrosophic similarity measure. Two different types of plants have been chosen as examples in this study. The first plant is a time-delayed integrating system. The second plant is an unstable system, which means that the output signal is very sensitive to any changes or disturbances in the input signal. This study examines the parameter uncertainties of systems by comparing them with some design methods from the literature. The results are presented comparatively in figures and tables to show the superiority of the proposed method.

 Integrating systems and unstable systems are two types of systems that are widely used in various industries, including control engineering and electrical engineering. However, controlling these systems can be a daunting task due to their inherent complexity. To address this challenge, the PI-PD controller structure has been widely adopted in the industry, as it has proven to be very successful in controlling integrating and unstable systems. In this paper, a new design method is proposed to determine the optimal controller parameters in the control of integrating and unstable systems with time delay. The design method utilizes a Genetic Algorithm-based optimization technique, which incorporates a new objective function that is based on the neutrosophic similarity measure. Two different types of plants have been chosen as examples in this study. The first plant is a time-delayed integrating system. The second plant is an unstable system, which means that the output signal is very sensitive to any changes or disturbances in the input signal. This study examines the parameter uncertainties of systems by comparing them with some design methods from the literature. The results are presented comparatively in figures and tables to show the superiority of the proposed method.

 Integrating systems and unstable systems are two types of systems that are widely used in various industries, including control engineering and electrical engineering. However, controlling these systems can be a daunting task due to their inherent complexity. To address this challenge, the PI-PD controller structure has been widely adopted in the industry, as it has proven to be very successful in controlling integrating and unstable systems. In this paper, a new design method is proposed to determine the optimal controller parameters in the control of integrating and unstable systems with time delay. The design method utilizes a Genetic Algorithm-based optimization technique, which incorporates a new objective function that is based on the neutrosophic similarity measure. Two different types of plants have been chosen as examples in this study. The first plant is a time-delayed integrating system. The second plant is an unstable system, which means that the output signal is very sensitive to any changes or disturbances in the input signal. This study examines the parameter uncertainties of systems by comparing them with some design methods from the literature. The results are presented comparatively in figures and tables to show the superiority of the proposed method.

Makale detayları

A Novel PI-PD Controller Tuning Method based on Neutrosophic Similarity Measure for Unstable and Integrating Processes with Time Delay

Yazarlar:

Tufan Doğruer

Yayıncı:

Dicle University

Dergi:

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi Vol.14 Issue 2, pp.273-281

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001291727

pISSN:

1309-8640

Neutrosophic similarity measure

PI-PD controller tuning

time delay unstable and integrating systemsNeutrosophic similarity measure

PI-PD controller tuning

time delay unstable and integrating systems

Sayı

Makale detayları

A Novel PI-PD Controller Tuning Method based on Neutrosophic Similarity Measure for Unstable and Integrating Processes with Time Delay

Yazarlar: Tufan Doğruer

Yayıncı: Dicle University

Dergi: Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi Vol.14 Issue 2, pp.273-281

Belge Tipi: Makale

Yayın Tarihi: 6/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001291727

pISSN: 1309-8640

Neutrosophic similarity measure

PI-PD controller tuning

time delay unstable and integrating systemsNeutrosophic similarity measure

PI-PD controller tuning

time delay unstable and integrating systems

Sayı

Yazarlar:

Tufan Doğruer

Yayıncı:

Dicle University

Dergi:

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi Vol.14 Issue 2, pp.273-281

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001291727

pISSN:

1309-8640