Preparation of nano sulfur from the wastes (foam) in the Al_Mishraq sulfur mine (Mosul/Iraq)

Saad Ahmed; Mote`a Abdulla; Ammar Hamdoon

Makale detayları

Preparation of nano sulfur from the wastes (foam) in the Al_Mishraq sulfur mine (Mosul/Iraq)

Yazarlar:

Saad Ahmed | Mote`a Abdulla | Ammar Hamdoon

Yayıncı:

Turkish Chemical Society

Ana Başlıklar:

Nanochemistry

Dergi:

Journal of the Turkish Chemical Society Section A: Chemistry Vol.11 Issue 1, pp.31-38

Belge Tipi:

Makale

Yayın Tarihi:

4/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001303746

pISSN:

2149-0120

Anahtar kelimeler:

Özet:

 The research included estimating the elemental sulfur percentage in sulfuric foam waste, which was found to be 88.15. Potassium polysulfide was prepared from this waste and used to prepare nano-sized sulfur particles through reduction processes. Stable suspensions were obtained for more than 30 days. The crystalline structure of the prepared samples was studied using X-ray diffraction XRD. It showed a crystalline growth of nano-sized sulfur particles from the non-crystalline structure at a concentration of 0.5 mL. The crystalline bundles began to appear at a concentration of 1 mL, and their intensity increased, and good bundles appeared at a concentration of 1.5 mL. Scanning electron microscopy SEM and energy-dispersive X-ray spectroscopy EDX were used to study the same prepared samples, and the particle size range was 19.59-43.47 nm, 31.33-44.23 nm, and 31.52-62.64 nm. The method was characterized by its ease, low cost, and absence of harmful environmental gas emissions.

 The research included estimating the elemental sulfur percentage in sulfuric foam waste, which was found to be 88.15. Potassium polysulfide was prepared from this waste and used to prepare nano-sized sulfur particles through reduction processes. Stable suspensions were obtained for more than 30 days. The crystalline structure of the prepared samples was studied using X-ray diffraction XRD. It showed a crystalline growth of nano-sized sulfur particles from the non-crystalline structure at a concentration of 0.5 mL. The crystalline bundles began to appear at a concentration of 1 mL, and their intensity increased, and good bundles appeared at a concentration of 1.5 mL. Scanning electron microscopy SEM and energy-dispersive X-ray spectroscopy EDX were used to study the same prepared samples, and the particle size range was 19.59-43.47 nm, 31.33-44.23 nm, and 31.52-62.64 nm. The method was characterized by its ease, low cost, and absence of harmful environmental gas emissions.

 The research included estimating the elemental sulfur percentage in sulfuric foam waste, which was found to be 88.15. Potassium polysulfide was prepared from this waste and used to prepare nano-sized sulfur particles through reduction processes. Stable suspensions were obtained for more than 30 days. The crystalline structure of the prepared samples was studied using X-ray diffraction XRD. It showed a crystalline growth of nano-sized sulfur particles from the non-crystalline structure at a concentration of 0.5 mL. The crystalline bundles began to appear at a concentration of 1 mL, and their intensity increased, and good bundles appeared at a concentration of 1.5 mL. Scanning electron microscopy SEM and energy-dispersive X-ray spectroscopy EDX were used to study the same prepared samples, and the particle size range was 19.59-43.47 nm, 31.33-44.23 nm, and 31.52-62.64 nm. The method was characterized by its ease, low cost, and absence of harmful environmental gas emissions.

 The research included estimating the elemental sulfur percentage in sulfuric foam waste, which was found to be 88.15. Potassium polysulfide was prepared from this waste and used to prepare nano-sized sulfur particles through reduction processes. Stable suspensions were obtained for more than 30 days. The crystalline structure of the prepared samples was studied using X-ray diffraction XRD. It showed a crystalline growth of nano-sized sulfur particles from the non-crystalline structure at a concentration of 0.5 mL. The crystalline bundles began to appear at a concentration of 1 mL, and their intensity increased, and good bundles appeared at a concentration of 1.5 mL. Scanning electron microscopy SEM and energy-dispersive X-ray spectroscopy EDX were used to study the same prepared samples, and the particle size range was 19.59-43.47 nm, 31.33-44.23 nm, and 31.52-62.64 nm. The method was characterized by its ease, low cost, and absence of harmful environmental gas emissions.

Makale detayları

Preparation of nano sulfur from the wastes (foam) in the Al_Mishraq sulfur mine (Mosul/Iraq)

Yazarlar:

Saad Ahmed | Mote`a Abdulla | Ammar Hamdoon

Yayıncı:

Turkish Chemical Society

Ana Başlıklar:

Nanochemistry

Dergi:

Journal of the Turkish Chemical Society Section A: Chemistry Vol.11 Issue 1, pp.31-38

Belge Tipi:

Makale

Yayın Tarihi:

4/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001303746

pISSN:

2149-0120

Foam

nano-sized sulfur

potassium polysulfide

Sayı

Makale detayları

Preparation of nano sulfur from the wastes (foam) in the Al_Mishraq sulfur mine (Mosul/Iraq)

Yazarlar: Saad Ahmed | Mote`a Abdulla | Ammar Hamdoon

Yayıncı: Turkish Chemical Society

Ana Başlıklar: Nanochemistry

Dergi: Journal of the Turkish Chemical Society Section A: Chemistry Vol.11 Issue 1, pp.31-38

Belge Tipi: Makale

Yayın Tarihi: 4/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001303746

pISSN: 2149-0120

Foam

nano-sized sulfur

potassium polysulfide

Sayı

Yazarlar:

Saad Ahmed | Mote`a Abdulla | Ammar Hamdoon

Yayıncı:

Turkish Chemical Society

Ana Başlıklar:

Nanochemistry

Dergi:

Journal of the Turkish Chemical Society Section A: Chemistry Vol.11 Issue 1, pp.31-38

Belge Tipi:

Makale

Yayın Tarihi:

4/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001303746

pISSN:

2149-0120