Different Curing Temperature Effects on Mechanical Properties of Jute/Glass Fiber Reinforced Hybrid Composites

Berkay KARACOR; Mustafa ÖZCANLI

doi:https://doi.org/10.30939/ijastech..989976

Makale detayları

Different Curing Temperature Effects on Mechanical Properties of Jute/Glass Fiber Reinforced Hybrid Composites

Yazarlar:

Berkay KARACOR | Mustafa ÖZCANLI

Yayıncı:

Otomotiv Mühendisleri Derneği

Ana Başlıklar:

İmalat

Dergi:

International Journal of Automotive Science And Technology 2021 Vol.5 Issue 4, pp.358-371

Belge Tipi:

Makale

Yayın Tarihi:

12/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000718817

Sıklık:

Üç Aylık

eISSN:

2587-0963

DOI:

https://doi.org/10.30939/ijastech..989976

Özet:

 

In this study, the effect of different curing temperatures (60°C,80°C, and 100°C) on the mechanical characteristics of Jute and Glass fiber-based hybrid composites were analyzed mechanically, physically, and morphologically. Jute fiber fabric and glass fiber fabrics (49 gr/m² and 100 gr/m²) were used as reinforcement elements, while epoxy was utilized as ma-trix materials. A vacuum assisted resin transfer molding method (VARTM) was used as the production method. The mechanical test results were achieved by the Tensile test and Vick-ers hardness test, while morphologic images were obtained by Scanning Electron Microsco-py (SEM). Physical data was also obtained by the ignition loss test. The effects of tempera-ture and hybridization on mechanical properties of hybrid composite samples formed with jute fabric and glass fiber material with different weights per square meter at different cur-ing temperatures are given in the results. Results show that increasing post cure temperature 60°C to 80°C 3.18%-3.41% rate augment in tensile strength. It was discovered that there was a decreasement in tensile strength with an increase in temperature from 80 °C to 100 °C after curing. In the hardness test results, increasing post curing temperature had an increas-ing effect on the hardness values. SEM analysis results also supported the tensile test re-sults.

Makale detayları

Different Curing Temperature Effects on Mechanical Properties of Jute/Glass Fiber Reinforced Hybrid Composites

Yazarlar: Berkay KARACOR | Mustafa ÖZCANLI

Yayıncı: Otomotiv Mühendisleri Derneği

Ana Başlıklar: İmalat

Dergi: International Journal of Automotive Science And Technology 2021 Vol.5 Issue 4, pp.358-371

Belge Tipi: Makale

Yayın Tarihi: 12/2021

Belge Dili: İngilizce

Document ID (Org No.): 2000718817

Sıklık: Üç Aylık

eISSN: 2587-0963

DOI: https://doi.org/10.30939/ijastech..989976

Sayı

Yazarlar:

Berkay KARACOR | Mustafa ÖZCANLI

Yayıncı:

Otomotiv Mühendisleri Derneği

Ana Başlıklar:

İmalat

Dergi:

International Journal of Automotive Science And Technology 2021 Vol.5 Issue 4, pp.358-371

Belge Tipi:

Makale

Yayın Tarihi:

12/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000718817

Sıklık:

Üç Aylık

eISSN:

2587-0963

DOI:

https://doi.org/10.30939/ijastech..989976