Experimental investigation of the effect of compression pressure on mechanical properties in glass fiber reinforced organic material-based brake pads production

Sait ARAS; Necmettin TARAKÇIOĞLU

doi:https://doi.org/10.35860/iarej.449089

Makale detayları

Experimental investigation of the effect of compression pressure on mechanical properties in glass fiber reinforced organic material-based brake pads production

Yazarlar:

Sait ARAS | Necmettin TARAKÇIOĞLU

Yayıncı:

Ceyhun YILMAZ

Ana Başlıklar:

Mühendislik ve uygulamalı operasyonlar

Dergi:

International Advanced Researches and Engineering Journal 2019 Vol.3 Issue 2, pp.111-115

Belge Tipi:

Makale

Yayın Tarihi:

8/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000469445

Sıklık:

Üç Yıllık

eISSN:

2618-575X

DOI:

https://doi.org/10.35860/iarej.449089

Özet:

 


In this study, samples which
can be used as brake pads are prepared. A mixture of 50% barite by mass, 20%
glass fiber, 25% phenolic resin and 5% coke powder was prepared, and 6 samples
were prepared by adding juniperus drupacea nut powder (JDNP) at 10%, 25%
and 40%. The samples were produced in 3 different mixing times, 2 different
compaction times, 3 different compaction temperatures and 3 different
compression pressures. The effect of the
compression pressure on the wear rate, hardness, density and cold friction
coefficient was investigated. The wear rate ranges from 0.093.10-7 -
4.235.10-7cm3.N-1.m-1. The coefficient of cold friction ranges from 0.30 to
0.48. The density is between 1.82-2.17g/cm3.
The hardness values are from 85 to 117
according to the Rockwell R scale. Wear rate and cold friction coefficient
values are in accordance with TS 555 standard. It
has been determined that the compressive pressure is most affected by the
hardness and friction coefficient. Generally, rise of pressure reduces
hardness and friction coefficient. The effect of
density on JDNP ratio is opposite.


.

Makale detayları

Experimental investigation of the effect of compression pressure on mechanical properties in glass fiber reinforced organic material-based brake pads production

Yazarlar: Sait ARAS | Necmettin TARAKÇIOĞLU

Yayıncı: Ceyhun YILMAZ

Ana Başlıklar: Mühendislik ve uygulamalı operasyonlar

Dergi: International Advanced Researches and Engineering Journal 2019 Vol.3 Issue 2, pp.111-115

Belge Tipi: Makale

Yayın Tarihi: 8/2019

Belge Dili: İngilizce

Document ID (Org No.): 2000469445

Sıklık: Üç Yıllık

eISSN: 2618-575X

DOI: https://doi.org/10.35860/iarej.449089

Sayı

Yazarlar:

Sait ARAS | Necmettin TARAKÇIOĞLU

Yayıncı:

Ceyhun YILMAZ

Ana Başlıklar:

Mühendislik ve uygulamalı operasyonlar

Dergi:

International Advanced Researches and Engineering Journal 2019 Vol.3 Issue 2, pp.111-115

Belge Tipi:

Makale

Yayın Tarihi:

8/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000469445

Sıklık:

Üç Yıllık

eISSN:

2618-575X

DOI:

https://doi.org/10.35860/iarej.449089