3D MICROFABRICATION AND MIXING PHENOMENA IN MICROFLUIDICS

Ecem SAYGILI; Özlem YEŞİL CELİKTAŞ

Makale detayları

3D MICROFABRICATION AND MIXING PHENOMENA IN MICROFLUIDICS

Yazarlar:

Ecem SAYGILI | Özlem YEŞİL CELİKTAŞ

Yayıncı:

Kirklareli University

Dergi:

Ejovoc (Electronic Journal of Vocational Colleges) 2018 Vol.8 Issue 2, pp.175-177

Belge Tipi:

Makale

Yayın Tarihi:

11/2018

Belge Dili:

İngilizce

Document ID (Org No.):

2000692992

eISSN:

2146-7684

pISSN:

2146-7684

Özet:

 



Microfluidic devices
are currently replacing their macroscopic counterparts in many applications.
Controlling the mass transport in the microchannels mostly depends on material
used and channel geometry is the key parameter to improve flows speed, reaction
sensitivity and surface robustness. As the flow type in the microfluidic
channels is laminar, micro-mixers have been using to provide semi-turbulent
flow inside the microchannels. In this study, microfluidic molds were
fabricated by using 3D printing method and mixing phenomena was observed in
different microplatforms with and without micro-mixer geometries to understand
the underlying diffusion mechanism, which causes to mixing phenomena in the
microchannel.




.

 



Microfluidic devices
are currently replacing their macroscopic counterparts in many applications.
Controlling the mass transport in the microchannels mostly depends on material
used and channel geometry is the key parameter to improve flows speed, reaction
sensitivity and surface robustness. As the flow type in the microfluidic
channels is laminar, micro-mixers have been using to provide semi-turbulent
flow inside the microchannels. In this study, microfluidic molds were
fabricated by using 3D printing method and mixing phenomena was observed in
different microplatforms with and without micro-mixer geometries to understand
the underlying diffusion mechanism, which causes to mixing phenomena in the
microchannel.




.

Makale detayları

3D MICROFABRICATION AND MIXING PHENOMENA IN MICROFLUIDICS

Yazarlar: Ecem SAYGILI | Özlem YEŞİL CELİKTAŞ

Yayıncı: Kirklareli University

Dergi: Ejovoc (Electronic Journal of Vocational Colleges) 2018 Vol.8 Issue 2, pp.175-177

Belge Tipi: Makale

Yayın Tarihi: 11/2018

Belge Dili: İngilizce

Document ID (Org No.): 2000692992

eISSN: 2146-7684

pISSN: 2146-7684

Sayı

Yazarlar:

Ecem SAYGILI | Özlem YEŞİL CELİKTAŞ

Yayıncı:

Kirklareli University

Dergi:

Ejovoc (Electronic Journal of Vocational Colleges) 2018 Vol.8 Issue 2, pp.175-177

Belge Tipi:

Makale

Yayın Tarihi:

11/2018

Belge Dili:

İngilizce

Document ID (Org No.):

2000692992

eISSN:

2146-7684

pISSN:

2146-7684