Investigation of the Bond Stregth Between Resin Cement and Current CAD/CAM Restorative Materials Applied With Different Surface Treatments

Numan Tatar

Makale detayları

Investigation of the Bond Stregth Between Resin Cement and Current CAD/CAM Restorative Materials Applied With Different Surface Treatments

Yazarlar:

Numan Tatar

Yayıncı:

Inonu University

Ana Başlıklar:

Klinik Tıp Bilimleri

Dergi:

İnönü Üniversitesi Sağlık Hizmetleri Meslek Yüksek Okulu Dergisi Vol.11 Issue 1, pp.1134-1143

Belge Tipi:

Makale

Yayın Tarihi:

3/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001284358

pISSN:

2147-7892

Anahtar kelimeler:

Özet:

 In dentistry, the fact that the restorations applied to the patient remain in the patients mouth for a long time without falling is among the important criteria for the success of the restoration. For this reason, the aim of our study is to examine the relationship between the resin cement and the different surface treatments applied to the current CADCAM blocks, which can be polished by the physician without the need for the firing process. 15 samples n15 of 2 mm thickness were produced from Vita Enamic V Lava Ultimate L and PEEK P blocks with surface treatments of control VC, LC, PC, HF acid VHF, LHF, PHF, 50 µm Al2O3 powder VAl, LAl, PAl, 30 µm Silica coated Al2O3 powder VSi, LSi, PSi. The resin cement applied samples were aged by thermal cycling. Afterwards, shear bond strength test was applied to the samples with an universal test device. Bond strength results were evaluated in the statistical program. When the findings were examined, it was seen that all applied surface treatments increased the bonding values.The highest bond strength values in all groups were observed in the silica coated Al2O3 powder VSi 17.27501.89167; LSi 18.08151.66664; PSi 14.81511.57730. The bond strength values of HF acid applied to Lava Ultimate and Vita Enamic groups were found to be statistically higher than the HF acid group applied to PEEK p0.05. As a result of our study, it has been observed that all surface treatments applied to CADCAM blocks increase the bond strength values, and the most successful bond strength value was in the sandblasting surface treatment with silica coated Al2O3 powder.

 In dentistry, the fact that the restorations applied to the patient remain in the patients mouth for a long time without falling is among the important criteria for the success of the restoration. For this reason, the aim of our study is to examine the relationship between the resin cement and the different surface treatments applied to the current CADCAM blocks, which can be polished by the physician without the need for the firing process. 15 samples n15 of 2 mm thickness were produced from Vita Enamic V Lava Ultimate L and PEEK P blocks with surface treatments of control VC, LC, PC, HF acid VHF, LHF, PHF, 50 µm Al2O3 powder VAl, LAl, PAl, 30 µm Silica coated Al2O3 powder VSi, LSi, PSi. The resin cement applied samples were aged by thermal cycling. Afterwards, shear bond strength test was applied to the samples with an universal test device. Bond strength results were evaluated in the statistical program. When the findings were examined, it was seen that all applied surface treatments increased the bonding values.The highest bond strength values in all groups were observed in the silica coated Al2O3 powder VSi 17.27501.89167; LSi 18.08151.66664; PSi 14.81511.57730. The bond strength values of HF acid applied to Lava Ultimate and Vita Enamic groups were found to be statistically higher than the HF acid group applied to PEEK p0.05. As a result of our study, it has been observed that all surface treatments applied to CADCAM blocks increase the bond strength values, and the most successful bond strength value was in the sandblasting surface treatment with silica coated Al2O3 powder.

 In dentistry, the fact that the restorations applied to the patient remain in the patients mouth for a long time without falling is among the important criteria for the success of the restoration. For this reason, the aim of our study is to examine the relationship between the resin cement and the different surface treatments applied to the current CADCAM blocks, which can be polished by the physician without the need for the firing process. 15 samples n15 of 2 mm thickness were produced from Vita Enamic V Lava Ultimate L and PEEK P blocks with surface treatments of control VC, LC, PC, HF acid VHF, LHF, PHF, 50 µm Al2O3 powder VAl, LAl, PAl, 30 µm Silica coated Al2O3 powder VSi, LSi, PSi. The resin cement applied samples were aged by thermal cycling. Afterwards, shear bond strength test was applied to the samples with an universal test device. Bond strength results were evaluated in the statistical program. When the findings were examined, it was seen that all applied surface treatments increased the bonding values.The highest bond strength values in all groups were observed in the silica coated Al2O3 powder VSi 17.27501.89167; LSi 18.08151.66664; PSi 14.81511.57730. The bond strength values of HF acid applied to Lava Ultimate and Vita Enamic groups were found to be statistically higher than the HF acid group applied to PEEK p0.05. As a result of our study, it has been observed that all surface treatments applied to CADCAM blocks increase the bond strength values, and the most successful bond strength value was in the sandblasting surface treatment with silica coated Al2O3 powder.

 Diş hekimliğinde hastaya uygulanan restorasyonların hasta ağzında uzun süre desimante olmadan kalması restorasyonun başarısı açısından önemli kriterler arasında yer almaktadır. Bu sebeple çalışmamızın amacı fırınlama işlemine gerek kalmadan hekim tarafından da masa başı parlatılabilen güncel CADCAM bloklarına uygulanan farklı yüzey işlemlerinin rezin siman ile olan bağlantısının incelenmesidir. Vita Enamic V, Lava Ultimate L ve PEEKP bloklardan, kontrol VC, LC, PC, HF asit VHF, LHF, PHF, 50 µm Al2O3 tozu VAl, Lal, PAl, 30 µm Silika kaplı Al2O3 tozu VSi, LSi, PSi yüzey işlemleri ile 2 mm kalınlığında 15er adet n15 numune üretildi. Rezin siman uygulanan örneklere termal siklus ile yaşlandırma işlemi uygulandı. Sonrasında örneklere üniversal test cihazı ile makaslama bağlanma dayanımı testi uygulandı. Bağlanma kuvveti sonuçları istatistik programında değerlendirildi. Elde edilen bulgular incelendiği zaman uygulanan tüm yüzey işlemlerinin bağlanma değerlerini arttırdığı görülmüştür.Tüm gruplardaki en yüksek bağlanma değerlerinin silika kaplı Al2O3 tozu uygulanan numunelerde olduğu VSi 17.27501.89167; LSi 18.08151.66664; PSi 14.81511.57730 görüldü. Lava Ultimate ve Vita Emamic gruplarına uygulanan HF asitin bağlanma değerlerinin istatiksel olarak PEEKe uygulanan HF asit grubundan yüksek olduğu görüldü p0.05. Çalışmanın sonucunda CADCAM bloklarına uygulanan tüm yüzey işlemlerinin bağlantı değerlerini arttırdığı, en başarılı bağlantı değerinin silika kaplı Al2O3 tozu ile kumlama yüzey işleminde olduğu gözlemlenmiştir.

Makale detayları

Investigation of the Bond Stregth Between Resin Cement and Current CAD/CAM Restorative Materials Applied With Different Surface Treatments

Yazarlar:

Numan Tatar

Yayıncı:

Inonu University

Ana Başlıklar:

Klinik Tıp Bilimleri

Dergi:

İnönü Üniversitesi Sağlık Hizmetleri Meslek Yüksek Okulu Dergisi Vol.11 Issue 1, pp.1134-1143

Belge Tipi:

Makale

Yayın Tarihi:

3/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001284358

pISSN:

2147-7892

Bond strength

CAD/CAM block

Fixed prostheses

Resin cement.

Bağlanma dayanımı

CAD/CAM blok

Rezin siman

Sabit protezler.

Sayı

Makale detayları

Yazarlar: Numan Tatar

Yayıncı: Inonu University

Ana Başlıklar: Klinik Tıp Bilimleri

Dergi: İnönü Üniversitesi Sağlık Hizmetleri Meslek Yüksek Okulu Dergisi Vol.11 Issue 1, pp.1134-1143

Belge Tipi: Makale

Yayın Tarihi: 3/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001284358

pISSN: 2147-7892

Sayı

Yazarlar:

Numan Tatar

Yayıncı:

Inonu University

Ana Başlıklar:

Klinik Tıp Bilimleri

Dergi:

İnönü Üniversitesi Sağlık Hizmetleri Meslek Yüksek Okulu Dergisi Vol.11 Issue 1, pp.1134-1143

Belge Tipi:

Makale

Yayın Tarihi:

3/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001284358

pISSN:

2147-7892