PERFORMANCE OF RECTANGULAR PIN-FIN HEAT SINK SUBJECT TO AN IMPINGING AIR FLOW

Adil Abbas MOHAMMED; Saad Abdulwahab RAZUQİ

doi:https://doi.org/10.18186/thermal.889174

Makale detayları

PERFORMANCE OF RECTANGULAR PIN-FIN HEAT SINK SUBJECT TO AN IMPINGING AIR FLOW

Yazarlar:

Adil Abbas MOHAMMED | Saad Abdulwahab RAZUQİ

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Journal of Thermal Engineering 2021 Vol.7 Issue 3, pp.666-676

Belge Tipi:

Makale

Yayın Tarihi:

2/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000505280

Sıklık:

İki Aylık

eISSN:

2148-7847

DOI:

https://doi.org/10.18186/thermal.889174

Özet:

 

The heat sink is used to enhance heat rejection from heated surface to air. The seize and the geometry of
the heat sink with the shape of the extended surfaces have a great influence on the heat transfer coefficient. The
first step to get the optimal design is to predict the heat transfer by conduction in solid walls of heat sink and then
by convection between the solid and air flow. The purpose of the present study is to predict the effectiveness of
closely spaced parallel rectangular fin array arrangement. The electronic processor was represented by the copper
heat sink base with thermal conductivity of 401 W/m.K. The 72 fins with the geometry above mentioned were
exposed to heat transfer with conduction and convection along all the boundaries except the bottom from which
heat flow toward air flow domain. Mesh generation at a specific cells, number of element and number of nodes
were taken under temperature difference validation. The experiments were done under impinging air flow rate
with Reynolds number ranged between 4000-16000. The flow was turbulent so the k-Ԑ turbulence model needed
to simulate mean flow characteristics. Constant heat fluxes boundary conditions were proposed with range between
10000-70000 kW/m2. The Results of temperature contour lines depicted a heat trend from the hot base through the
extended surfaces to the fin tips. The fins were aligned in the core of heat sink showed higher temperature gradient
compared with the fins existed in lines surrounded the core. The thermal resistance decreased as the Reynolds
number increased and the Nusselt number increased as the Reynolds number increased and also when the heat flux
increased. The Reynolds number depicted increasing as the Nusselt number increased and so the heat rejected
from the heat sink base increased. There is a good agreement between the experimental and simulating results at
error percentage not exceed 2%.

Makale detayları

PERFORMANCE OF RECTANGULAR PIN-FIN HEAT SINK SUBJECT TO AN IMPINGING AIR FLOW

Yazarlar: Adil Abbas MOHAMMED | Saad Abdulwahab RAZUQİ

Yayıncı: Yildiz Technical University

Ana Başlıklar: Uygulamalı fizik

Dergi: Journal of Thermal Engineering 2021 Vol.7 Issue 3, pp.666-676

Belge Tipi: Makale

Yayın Tarihi: 2/2021

Belge Dili: İngilizce

Document ID (Org No.): 2000505280

Sıklık: İki Aylık

eISSN: 2148-7847

DOI: https://doi.org/10.18186/thermal.889174

Sayı

Yazarlar:

Adil Abbas MOHAMMED | Saad Abdulwahab RAZUQİ

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Journal of Thermal Engineering 2021 Vol.7 Issue 3, pp.666-676

Belge Tipi:

Makale

Yayın Tarihi:

2/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000505280

Sıklık:

İki Aylık

eISSN:

2148-7847

DOI:

https://doi.org/10.18186/thermal.889174