Selection of Boron Carbide (B4C) Doped Epoxy Based Nanocomposites by Multi-Criteria Decision Making Methods

Batuhan Özakın; Kürşat Gültekin; İlhan Çelik

Makale detayları

Selection of Boron Carbide (B4C) Doped Epoxy Based Nanocomposites by Multi-Criteria Decision Making Methods

Yazarlar:

Batuhan Özakın | Kürşat Gültekin | İlhan Çelik

Yayıncı:

Zonguldak Bulent Ecevit University

Ana Başlıklar:

Mühendislik

Dergi:

Karaelmas Fen ve Mühendislik Dergisi Vol.13 Issue 1, pp.35-41

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001295376

pISSN:

2146-7277

Anahtar kelimeler:

Özet:

 Material selection plays a very important role in product design and development. In addition, the selection of the right material is of great importance for users to achieve high performance and sustainability. In product development, it is necessary to choose the optimum material that provides maximum performance and minimum cost. Recently, multi-criteria decision making methods have become the preferred methods to select the optimum Çizelge 1material. These methods analyze the problems by breaking them into small parts, then put the parts together and offer an effective solution to the problem. In this study, nanocomposites obtained by adding hexagonal boron carbide B4C nanoparticles in different weight ratios 0.5, 1, 2, 3, 4, 5 to the epoxy-based resin; Material selection was carried out by using MOORA and TOPSIS multi-criteria decision making methods by using tensile strength, strain, storage modulus, glass transition temperature Tg, crosslink density, toughness and price properties. It was concluded that 2 by weight B4C added epoxy nanocomposite should be preferred as the optimum material in the material selections made by MOORA and TOPSIS multi-criteria decision making methods.

 Material selection plays a very important role in product design and development. In addition, the selection of the right material is of great importance for users to achieve high performance and sustainability. In product development, it is necessary to choose the optimum material that provides maximum performance and minimum cost. Recently, multi-criteria decision making methods have become the preferred methods to select the optimum Çizelge 1material. These methods analyze the problems by breaking them into small parts, then put the parts together and offer an effective solution to the problem. In this study, nanocomposites obtained by adding hexagonal boron carbide B4C nanoparticles in different weight ratios 0.5, 1, 2, 3, 4, 5 to the epoxy-based resin; Material selection was carried out by using MOORA and TOPSIS multi-criteria decision making methods by using tensile strength, strain, storage modulus, glass transition temperature Tg, crosslink density, toughness and price properties. It was concluded that 2 by weight B4C added epoxy nanocomposite should be preferred as the optimum material in the material selections made by MOORA and TOPSIS multi-criteria decision making methods.

 Material selection plays a very important role in product design and development. In addition, the selection of the right material is of great importance for users to achieve high performance and sustainability. In product development, it is necessary to choose the optimum material that provides maximum performance and minimum cost. Recently, multi-criteria decision making methods have become the preferred methods to select the optimum Çizelge 1material. These methods analyze the problems by breaking them into small parts, then put the parts together and offer an effective solution to the problem. In this study, nanocomposites obtained by adding hexagonal boron carbide B4C nanoparticles in different weight ratios 0.5, 1, 2, 3, 4, 5 to the epoxy-based resin; Material selection was carried out by using MOORA and TOPSIS multi-criteria decision making methods by using tensile strength, strain, storage modulus, glass transition temperature Tg, crosslink density, toughness and price properties. It was concluded that 2 by weight B4C added epoxy nanocomposite should be preferred as the optimum material in the material selections made by MOORA and TOPSIS multi-criteria decision making methods.

 Ürün tasarlama ve geliştirilmesinde malzeme seçimi çok önemli bir rol oynamaktadır. Ayrıca kullanıcıların yüksek performans ve sürdürülebilirlik elde etmesi için doğru malzemenin seçimi büyük önem taşımaktadır. Ürün geliştirmede maksimum performansı ve minimum maliyeti sağlayan optimum malzemeyi seçmek gerekmektedir. Optimum malzemeyi seçmek için son zamanlarda çok kriterli karar verme yöntemleri tercih edilen yöntemler haline gelmiştir. Bu yöntemler sorunları küçük parçalara ayırarak analizler gerçekleştirip ardından parçaları bir araya getirip soruna etkili çözüm sunmaktadırlar. Bu çalışmada, epoksi esaslı reçineye ağırlıkça farklı oranlarda 0.5, 1, 2, 3, 4, 5 hegzagonal bor karbür B4C nanoparçacıkları eklenerek elde edilen nanokompozitlerin; çekme mukavemeti, şekil değiştirme, depolama modülü, camsı geçiş sıcaklığı Tg, çapraz bağ yoğunluğu, tokluk ve fiyat özellikleri kullanılarak MOORA ve TOPSIS çok kriterli karar verme yöntemleriyle malzeme seçimi gerçekleştirilmiştir. MOORA ve TOPSIS çok kriterli karar verme yöntemleriyle yapılan malzeme seçimlerinde ilk sırayı her iki yöntemde de ağırlıkça 2 oranında B4C katkılı epoksi nanokompozitin optimum malzeme olarak tercih edilmesi gerektiği sonucuna varılmıştır.

Makale detayları

Selection of Boron Carbide (B4C) Doped Epoxy Based Nanocomposites by Multi-Criteria Decision Making Methods

Yazarlar:

Batuhan Özakın | Kürşat Gültekin | İlhan Çelik

Yayıncı:

Zonguldak Bulent Ecevit University

Ana Başlıklar:

Mühendislik

Dergi:

Karaelmas Fen ve Mühendislik Dergisi Vol.13 Issue 1, pp.35-41

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001295376

pISSN:

2146-7277

Nanocomposites

Material selection

Multi-criteria decision making methods

MOORA

TOPSISNanokompozitler

Malzeme seçimi

Çok kriterli karar verme yöntemleri

MOORA

TOPSIS

Sayı

Makale detayları

Yazarlar: Batuhan Özakın | Kürşat Gültekin | İlhan Çelik

Yayıncı: Zonguldak Bulent Ecevit University

Ana Başlıklar: Mühendislik

Dergi: Karaelmas Fen ve Mühendislik Dergisi Vol.13 Issue 1, pp.35-41

Belge Tipi: Makale

Yayın Tarihi: 6/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001295376

pISSN: 2146-7277

Sayı

Yazarlar:

Batuhan Özakın | Kürşat Gültekin | İlhan Çelik

Yayıncı:

Zonguldak Bulent Ecevit University

Ana Başlıklar:

Mühendislik

Dergi:

Karaelmas Fen ve Mühendislik Dergisi Vol.13 Issue 1, pp.35-41

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001295376

pISSN:

2146-7277