A new multi-input single-output voltage-mode universal biquadratic filter with grounded passive elements and orthogonally adjustable filter parameters

Elham Minayi

Makale detayları

A new multi-input single-output voltage-mode universal biquadratic filter with grounded passive elements and orthogonally adjustable filter parameters

Yazarlar:

Elham Minayi

Yayıncı:

Pamukkale University

Ana Başlıklar:

Elektrik Mühendisliği (Diğer)

Dergi:

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Vol.31 Issue 3, pp.368-372

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001352058

pISSN:

2147-5881

Anahtar kelimeler:

Özet:

 A novel multiple-input, single-output MISO Voltage-Mode VM analog filter configuration composed of two plus-type differential voltage current conveyors DVCC as active components moreover two capacitors and three resistors as passive elements is proposed in this paper. By selecting input voltage nodes in different orders, it is able to provide all five standard second-order filter responses in one topology. Also, it does not need any passive element matching condition; so the proposed filter is suitable for integrated circuit IC design. Further, it offers orthogonal control of quality factor Q and angular frequency ω0, can be adjusted electronically. Further, to confirm the theoretical analysis, simulation results are investigated. TSMC 0.13 µm process parameters is applied to the circuit and voltage sources are selected as 0.75 V and 0.2 V for VB , in this case the power consumption is found as 0.65 mW.

 A novel multiple-input, single-output MISO Voltage-Mode VM analog filter configuration composed of two plus-type differential voltage current conveyors DVCC as active components moreover two capacitors and three resistors as passive elements is proposed in this paper. By selecting input voltage nodes in different orders, it is able to provide all five standard second-order filter responses in one topology. Also, it does not need any passive element matching condition; so the proposed filter is suitable for integrated circuit IC design. Further, it offers orthogonal control of quality factor Q and angular frequency ω0, can be adjusted electronically. Further, to confirm the theoretical analysis, simulation results are investigated. TSMC 0.13 µm process parameters is applied to the circuit and voltage sources are selected as 0.75 V and 0.2 V for VB , in this case the power consumption is found as 0.65 mW.

 A novel multiple-input, single-output MISO Voltage-Mode VM analog filter configuration composed of two plus-type differential voltage current conveyors DVCC as active components moreover two capacitors and three resistors as passive elements is proposed in this paper. By selecting input voltage nodes in different orders, it is able to provide all five standard second-order filter responses in one topology. Also, it does not need any passive element matching condition; so the proposed filter is suitable for integrated circuit IC design. Further, it offers orthogonal control of quality factor Q and angular frequency ω0, can be adjusted electronically. Further, to confirm the theoretical analysis, simulation results are investigated. TSMC 0.13 µm process parameters is applied to the circuit and voltage sources are selected as 0.75 V and 0.2 V for VB , in this case the power consumption is found as 0.65 mW.

 Bu çalışmada, yalnızca iki artı tipli gerilim farkı alan akım taşıyıcı DVCC, iki kapasitör ve üç direnç kullanarak, tek bir topolojide ikinci derece filternin standart beş farklı tepkisinin tamamını sağlayabilecek çok girişli, tek çıkışlı gerilim modlu evrensel biquadratic filtre devresi önerilmiştir. Önerilen devre, pasif eleman eşleştirme şartından bağımsızdır. Bu nedenle, Entegre Devre Teknolojisi IC için uygundur. Ayrıca, kalite faktörü Q ve açısal frekansın ω0 dikey olarak kontrol edilmesi mümkün olup, elektronik olarak ayarlanabilirdir. Ayrıca, teorik analizleri doğrulamak amacıyla benzetim PSPICE simülasyon sonuçları incelenmiştir. Devre, TSMC 0.13 µm işlem parametreleri kullanılarak gerçekleştirilmiş ve gerilim kaynakları 0.75 V ile VB için 0.2 V olarak seçilmiştir. Bu durumda güç tüketimi 0.65 mW olarak bulunmuştur.

Makale detayları

A new multi-input single-output voltage-mode universal biquadratic filter with grounded passive elements and orthogonally adjustable filter parameters

Yazarlar:

Elham Minayi

Yayıncı:

Pamukkale University

Ana Başlıklar:

Elektrik Mühendisliği (Diğer)

Dergi:

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Vol.31 Issue 3, pp.368-372

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001352058

pISSN:

2147-5881

DVCC+

Analog filter

Voltage-Mode

Multiple input-single output filter

Universal biquadratic filterDVCC+

Analog filtre

Gerilim-Modlu

Çok girişli- tek çıkışlı filtre

Evrensel bikuadratik filtre

Sayı

Makale detayları

Yazarlar: Elham Minayi

Yayıncı: Pamukkale University

Ana Başlıklar: Elektrik Mühendisliği (Diğer)

Dergi: Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Vol.31 Issue 3, pp.368-372

Belge Tipi: Makale

Yayın Tarihi: 6/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001352058

pISSN: 2147-5881

Sayı

Yazarlar:

Elham Minayi

Yayıncı:

Pamukkale University

Ana Başlıklar:

Elektrik Mühendisliği (Diğer)

Dergi:

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Vol.31 Issue 3, pp.368-372

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001352058

pISSN:

2147-5881